To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better...

Is it possible to improve a bestseller? That was the question facing our R&D Department following the release of our D7X suits. We took the time to listen to the market, delved into our own desires and experiences, and the result is the new flags...

The Waterproofs G2 glove series is constructed with all our knowledge about cold fingers. Excellent fit, enhanced movability, less restriction and squeeze. All in one Glove. This high-quality 3D shaped glove features pre-bent fingers, glideskin inter...

New hood for the diver who appreciates being visible at sea, even under tough conditions. H1 5.10 is now available in a highly visible orange color with reflexes. Read more...

A faceseal sandwich neoprene construction with Glideskin on the inside and Smoothskin on the outside for an effective seal for fullface masks. Read more...

The Inflation Valvefrom Waterproof is a high performance valve suitable for all areas of recreational and technical diving. The easy accessible push button ables the diver to inflate a smooth flow of gas and fully control the buoyancy.

The R7 Rescue concept was developed together with Swedish Sea Rescue Society, SSRS. This resulted in a safe, comfortable and practical suit, anatomically designed with no restraints during active work.Read more...

This suit is based on designated military specifications. This is an all black combat style suit with two expandable Power Pockets on the thighs. Read more...

The Waterproof gender specific W-Breaker breathable jacket is a lightweight hooded and windproof technical leisure jacket that combines the best of fabrics and breathable wind insulation. Read more...

When Swedish cutting-edge design merges with a high-end wetsuit for the demanding diver. Looking for a top-notch wetsuit that is ready for all kinds of diving?
Extremely soft, flexible Neoflex 100% CR neoprene, in an elegant grey & black dul...

There are several solutions that support drysuits with soft socks on the market. “Rock-Boots” is the common name for the group in general. But there are few boots that also support the insulation factor. Read more...

The Waterproof Valve is a high performance valve suitable for all areas of recreational and technical diving. Waterproof Valves is extremely sensitive for variations in pressure and provides the diver with excellent buoyancy control. The design of t...

For better and for worse, the new reinforced D7 Pro Cordura ISS takes all the beating any terminator classified Tech-Diver can deliver, thanks to the complete outer lining in Cordura®. Read more ...

For better and for worse, the new reinforced D7 Pro Cordura ISS takes all the beating any terminator classified Tech-Diver can deliver, thanks to the complete outer lining in Cordura®. Read more ...

This robust Glove is for you who never can resist poking on sharp objects, or digging down into the gravel seeking for treasures. Read more...

This robust glove is for you who never can resist poking on sharp objects or digging down into the gravel seeking for treasures. Full DuPontTM Kevlar® Fiber covering the palm this G2 Aramid will take any beating a dedicated and devoted diver can ...

The H1 10mm Hood features a 10mm double layered protection in critical heat loss areas and includes the unique HAVS which uses one-way valves to vent annoying air buildup in the hood. Read more...

This suit is based on designated military specifications. This is an all black combat style suit with two expandable Power Pockets on the thighs. Read more...

Waterproofs fibrefill thermal vest gives you good surface protection between dives with style and attitude for "Facing Reality".

Low Profile High Flow Exhaust Valve.

To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better than...

The D1X Drysuit is the new generation amazing suits based on the famous D1 Hybrid Waterproof developed, patented and released a couple of years ago. The patented D1 Hybrid was the first existing Insulated Constant Volume Drysuit. And has so far no fo...

This stylish glove features a glide skin interior and a long zipper for easy donning. Polyurethane embossed section in the palm provides a non-slip grip and abrasion protection. Read more...

During Wateroroofs numerous of Polar trips Expeditions they learned that divers underestimate the heat loss under extreme conditions. Read more...

A cool looking wet glove in 5mm superstretch neoprene. Quality, soft comfortable neoprene with pre-bent fingers for great fit. Glued and blind stitched for strength and anti-slip palm for extra grip. Read more...

The H1 7mm Hood features a 7mm double layered protection in critical heat loss areas and includes the unique HAVS which uses one-way valves to vent annoying air buildup in the hood. Read more...

To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better than...

Waterproof has developed and tested drysuit material together with the producers since 1983 and this is the best lightweight drysuit fabric they have ever developed. The special formula Tri-Lam fabric is lightweight, soft and durable – a rare c...

This stylish glove features a glide skin interior and a long zipper for easy donning. Polyurethane embossed section in the palm provides a non-slip grip and abrasion protection. Read more...

New hood for the diver who appreciates being visible at sea, even under tough conditions. H1 5/7 is now available in a highly visible orange color with reflexes. Read more...

The H1 7mm Hood features a 7mm double layered protection in critical heat loss areas and includes the unique HAVS which uses one-way valves to vent annoying air buildup in the hood. Read more...

New hood for the diver who appreciates being visible at sea, even under tough conditions. H1 5/7 is now available in a highly visible orange color with reflexes.

The H1 7mm Hood features a 7mm double layered protection in critical heat loss areas and includes the unique HAVS which uses one-way valves to vent annoying air buildup in the hood. Read more...

Waterproofs top selling Neoprene model D10 PRO is now upgraded with ISS, the unique Integrated Silicone Seal system Waterproof developed and presented to the diving market recently. Read more ...

Based on the world’s first Ultra Light D9 Drysuit Concept from Waterproof, the D9X Extended Breathable Drysuit features some technical improvements designed for the needs of professional and serious divers. Read more ...

Based on the world’s first Ultra Light D9 Drysuit Concept from Waterproof, the D9X Extended Breathable Drysuit features some technical improvements designed for the needs of professional and serious divers. Read more ...

A One Size Fits All stretchy “over-hood” that covers all exposed skin. Holes for mask and breathing device can be trimmed to perfection by the user. Also provides excellent protection against Jellyfish in infested waters.

H30 hood is part of the accessories in the new sports range from Waterproof. The hood, along with socks and gloves designed for use in warmer water. Read more...

Keeping your feet protected from cold is essential for overall warmth, your mother told you so didn’t she? Waterproof keeps Vom and your feet happy by offering a boot range that is built for extreme conditions. Read more...

This is a tough 6.5mm semi-dry boot with an extra long zipper for easy donning. The heels and toes are strengthened. Read more...

This is a tough 6.5mm semi-dry boot with an extra long zipper for easy donning. The heels and toes are strengthened. Read more...

To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better than...

WP Hanger is a specially designed hanger that ensures that your wet suit or drysuit always has the same fit. WP hanger has a large solid hook that ensures that your divesuit during cleaning, drying and storage when not in use.

To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better than...

The D70 SC concept was developed after numerous requests from dive schools, instructors and resorts for a durable, yet economical drysuit for rental and training. This 3.5mm neoprene drysuit is basic yet durable and a suitable choice for the beginner...

To achieve high thermal insulation without increasing weight, BODY X and BODY 2X are made of a hollow fiber polyester. Inspired by the structure of the fur of a polar bear who lives under extreme environmental conditions. It insulates far better than...

The Dual Layer provides enhanced features in a very low bulk package. Warmer due to the two layers of warming fibres. Warmer with less bulk due to the snug fit. Read more...

Extremely flexible - tremendously increased well being, one size fits a wide range of necks. Less strain to neck. Great material stability - better against ageing and UV light. Read more...  

Extremely flexible - tremendously increased well being, one size fits a wide range of necks. Less strain to neck. Great material stability - better against ageing and UV light. Read more...  

   Detachable neck seal that eliminates water flow when diving without a hood.