Deep Ocean WING - OMS
The OMS Deep Ocean Wing is made in a classic horseshoe style with a bungee system. It has a single inflator with the corrugated hose connected with a non dumpable elbow connector attached in the front upper left position. There are two dump and over pressure valves located on the front lower left and upper right side. The outer wing bladder is made with a 1,000 denier nylon exterior and TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine. The inner bladder is made of polyurethane material and its seams are ultrasonic welded. The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear. It is made for double or single tank use and comes in a 3 Lift capcities, 45lbs (20kg), 60lbs (27kg), or 94 lbs (42kg) and multiple colors. There is also the Chemical resistant version as well.
Deep Ocean Wings include the Retraction Band System, which is designed to keep the wing folded behind the diver’s shoulders, reducing drag and the chance of entanglement. The bands can be repositioned to keep the diver in optimal trim during different dive configurations, i.e. stage bottles, carrying camera systems or to optimize personal trim.
- Three Sizes
45 lbs, 60 lbs and 94 lbs.
- Lift capacity
45 lbs (~20,5 kg) / 60lbs (~27,1 kg) / 94lbs (~42,6 kg)
- Horse Shoe Design
- Retraction Band System (Bungee)
Spare Retraction bands are included.
- The outer wing bladder
Is made with a 1.000 denier nylon exterior.
- Inner Bladder
TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine.
Interior zipper backing.
- Color
Black or Red.
The black color marks the harness, all other colors mark the color of the wing.
- Power inflator hose included
With Low Pressure (LP) inflation hose.
- 2 Over pressure valves
One Located on the front lower left side. One Over pressure valves on the top right site.
- Suitable for
Double tank system, Single tank system.
The OMS Deep Ocean Wing is made in a classic horseshoe style with a bungee system. It has a single inflator with the corrugated hose connected with a non dumpable elbow connector attached in the front upper left position. There are two dump and over pressure valves located on the front lower left and upper right side. The outer wing bladder is made with a 1,000 denier nylon exterior and TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine. The inner bladder is made of polyurethane material and its seams are ultrasonic welded. The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear. It is made for double or single tank use and comes in a 3 Lift capcities, 45lbs (20kg), 60lbs (27kg), or 94 lbs (42kg) and multiple colors. There is also the Chemical resistant version as well.
