Deep Ocean Wing 2.0 - OMS
The Deep Ocean 2.0 Hybrid Wing is made in a donut-style with internal bungees and can be used with single or double tanks!
It has a single inflator with a corrugated hose connected to a non dumpable elbow connector uniquely attached in the top left position. On the top right is an over pressure valve with an adjustable length cord and knob. There are two dump and over pressure valves located on the front lower left and right side. In addition to the built in single tank adaptor is a tank protection strap attached with Velcro. The outer wing bladder is made with a 1.000 denier nylon exterior and TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine. The inner bladder is made of polyurethane material and its seams are ultrasonic welded. The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear. It is made for double or single tank use and has an adjustable lift capacity from 45lbs (20kg) - 60lbs (27kg) simply by adjusting the internal bungees.
- Lift capacity
45 lbs - 60lbs (~22,2 kg - ~27,2 kg)
- Internal bungees
- The outer wing bladder
Is made with a 1.000 denier nylon exterior.
- Inner Bladder
TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine.
- Color
The black color marks the harness, all other colors mark the color of the wing.
- Material
Cordura.
- 3 Over pressure valves
Two Located on the front lower left and right side. One Over pressure valves on the top right site with an adjustable length cord and knob.
- Suitable for
Double tank system, Single tank system.
The Deep Ocean 2.0 Hybrid Wing is made in a donut-style with internal bungees and can be used with single or double tanks!
It has a single inflator with a corrugated hose connected to a non dumpable elbow connector uniquely attached in the top left position. On the top right is an over pressure valve with an adjustable length cord and knob. There are two dump and over pressure valves located on the front lower left and right side. In addition to the built in single tank adaptor is a tank protection strap attached with Velcro. The outer wing bladder is made with a 1.000 denier nylon exterior and TPU laminated liner inside to avoid punctures, tears or deterioration from salt water or chlorine. The inner bladder is made of polyurethane material and its seams are ultrasonic welded. The grommets are reinforced with a second ring of material to eliminate potential weak points for wear or tear. It is made for double or single tank use and has an adjustable lift capacity from 45lbs (20kg) - 60lbs (27kg) simply by adjusting the internal bungees.
